Best 1200 Watt Rms Amps 2023

Key Features:

• This is a Rockville RXA-F2 car stereo amplifier that is rated at 2400 watts peak power and 1200 watts RMS. It is a 4-channel amplifier, meaning it has 4 separate channels for left and right front, and left and right rear speakers.
• This 1200-watt rms amp is CEA compliant, meaning that it meets the standards set by the Consumer Electronics Association. It has 400 watts of power at 4 ohms and 1% THD+N, 600 watts at 2 ohms < 1% THD, and 600 watts bridged @ 4 Ohms < 1% THD. This amp is ideal for powering speakers or other audio equipment.
• This 1200-watt rms amp has four 300-watt rms channels @ 2 ohms, two 600-watt rms channels @ 4 ohms bridged, and four 200-watt rms channels @ 4 ohms.
• This is a 1200-watt rms amplifier that can be used with two speakers at 2 ohms or one speaker at 4 ohms.
• This amp is designed for use with high-powered audio systems. It features a high-speed MOSFET power supply that can handle up to 1200 watts of power.

Key Features:

• The 1200-watt rms amps for a shopper is a quality amplifier that offers a great frequency response and crossover network. It is also designed for durability and efficient performance.
• This Class D 1200 Watt RMS Car Amplifier is a 4-channel amplifier that is rated at 300 watts RMS x 4 at 2 ohms, and 192 watts RMS x 4 at 4 ohms. The amplifier also features a 2-way protection circuitry to keep your speakers safe.
• This 1200-watt rms amp has a crossover feature that allows you to connect 2 channels together. The amplifier also has a fixed 90Hz highpass and lowpass crossover.
• The 4-channel bass boost car amplifier is a powerful amplifier that can produce up to 1200 watts of power. It has a frequency response of 9Hz-27KHZ and an SNR of 88DB. It also has a remote bass knob, 2-way protection, hi/low pass crossovers, and 2 Ohm Stable.
• This is a Taramps 1200W RMS 4-Channel Class D Amplifier. It is a 1200-watt rms amplifier that is 4 channels.

Key Features:

• This is a car amplifier that is 1200 watts peak/300 watts RMS. It is a 4-channel amplifier.
• 2 Ohm: 75 Watts x 4 Channel <1% THD+N. 4 Ohm: 55 Watts x 4 Channel <1% THD+N. 4 Ohms bridged: 150 Watts x 2 Channel <1% THD+N. High-Speed MOSFET Power Supply.
• The 1200-watt rms amps is a fully adjustable 6dB / octave crossover with differential circuitry. Low pass filter: 50Hz – 200Hz. High pass filter: 50Hz – 1.2KHz. Full IC-controlled protection circuitry.
• The 1200-watt rms amp is a powerful amp that is perfect for a shopper who wants to be able to adjust the bass equalizer. The mute and delay soft start systems are great features that will help to keep the shopper’s car audio system running smoothly. The status mode LED indicator is a great way to keep an eye on the amp’s performance. The minimum THD at rated power is <0.1%. This means that the shopper can expect great sound quality from this amp. The S / N ratio is > 90 dB. This means that the shopper can expect very little background noise from this amp.
• The 1200-watt rms amp is a powerful amplifier that can provide a lot of power to your speakers. It has under-voltage protection at 9V and over-voltage protection at 16V. It also has a frequency response of 20Hz – 20KHz and a damping factor of >150 @ 100Hz. The fuse is 20A x 2 and the dimensions are (L x W x H) 12.2″ x 8.5″ x 2.24″. The weight is 6.1 lbs.

Key Features:

• This product is a 1200-watt mono amplifier that features Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low-temperature, high-amplification system.
• The Ultra-Fi MOSFET outputs on this 1200-watt rms amp are selected for both balance and output power, meaning that the power delivery will be smooth and consistent even during demanding musical peaks.
• This product is a 1200-watt rms amplifier. It is designed to protect against shorts and to provide blue illumination for normal operation. If there is a red short present, it requires the attention of an installer.
• This is an amp that can output up to 1200 watts of power. It can be used with 4-ohm, 2-ohm, or 1-ohm speakers.
• This amp is 1200 watts rms and is 9″ wide, 13.25″ long, and 2.5″ tall. It has a 1-year manufacturer’s warranty.

Key Features:

• This is a KICKER 46CXA12001 CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp. It comes with a Rockville RWK21 2 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA. It is an efficient Class-D amplifier with a three-second turn-on/off delay to eliminate unwanted interference. The variable 12dB crossovers provide control to dial in the perfect sound. The KickEQ 6dB variable bass boost for those additional low frequencies.
• The amp is a 1200-watt rms amp that has a 24 dB subsonic filter for protection from potentially damaging frequencies. The amp is also compatible with CXARC Remote Bass Control and has a small footprint for easier installation. The dimension of the amp is 15.75 inches by 9 inches by 4 inches and it weighs 7.75 pounds.
• The Kicker RWK21 is a 2-gauge car amplifier wiring kit that includes 17′ high-grade twisted pair RCA cables, 17′ 2-gauge translucent blue SuperFlex power cables, 17′ 18-gauge blue remote cable, 17′ 16-gauge clear speaker wire, 3′ 4-gauge clear SuperFlex ground wire, gold-plated ANL heat-resistant fuse holder, 150-amp ANL gold-plated fuse, and 7′ split tube loom.
• This 1200-watt rms amp is for a shopper who wants a durable and flexible product that can withstand extreme temperatures. The accessories included allow for easy installation and the PVC outer jacket provides protection against damage.

Key Features:

• The Rockville dB12 is a 2000-watt peak/500-watt RMS mono 2-ohm amplifier car amp that is dyno-certified.
• This dB12 amplifier is a mono 2-ohm amplifier that is rated at 2000 watts peak power and 500 watts RMS power. The amplifier is dyno-certified meaning that it has been tested and proven to deliver its rated power output. The amplifier features include a low pass filter, high pass filter, bass boost, and remote subwoofer control.
• This 1200-watt rms amp is for a shopper who wants a high-powered amp that is certified to deliver its promised power output. This amp is designed to work with subwoofers to provide deep, powerful bass.
• This is a 1200-watt rms amplifier that can be used for a single channel. It has a low THD+N, meaning it will produce little to no distortion. It can handle 500 watts at 2 ohms and 300 watts at 4 ohms.
• This is a 1200-watt rms amp. It is rated at 2000 watts peak power and is suitable for use with 2-ohm or 4-ohm speakers.

Key Features:

Key Features:

• This amplifier is designed to be efficient and run cooler than other amplifiers. It is a premium Class D amplifier that is 1200 watts RMS.
• This is a 1200-watt rms amp that is stable with outputs into 1 Ohm loads.
• This is an amplifier with 1200 watts of power. It has thermal protection to prevent overheating, DC offset protection to prevent damage from electrical surges, reverse polarity protection to prevent damage from reversed electrical connections, and short circuit protection to prevent damage from electrical shorts.
• This amp is 1200 watts RMS and has a level control to adjust the gain of the channel to match the output voltage from your head unit. A remote gain control is also included.
• This is an amp for a subwoofer. It includes a remote bass level control and a 17-ft cable. It has (6) 40 amp ATO fuses (3 installed). It also includes (4) 1-inch self-tapping screws, and a manual.

Key Features:

• This is a 1200-watt rms amplifier for a car subwoofer enclosure. It comes with an amp kit.
• The Rockville RV12.2B is a dual 12″ bass enclosure system with a matching monoblock amplifier. It is rated at 1200 watts peak power and 400 watts RMS. The cabinet is designed using a quasi-transmission line design.
• This product is a 1200-watt rms amplifier for a shopper. It is angled at 15% for near-perfect vehicle bass alignment. The exterior is made of high-quality aviation-grade tweed carpet. The amplifier has an oversized Rockville Shield embroidery. The speaker terminal is gold-plated and push-style. The amplifier has dual, high-power, high-efficiency 12″ subwoofers.
• The 1200-watt rms amps is a powerful amplifier that is capable of outputting 1200 watts of peak power. It has a power output of 200 watts RMS and is cea-2006 compliant. It also has a frequency response of 15Hz to 20Khz (-3dB).
• This is a car audio amplifier kit. It includes RCA cables, a power cable, a ground wire, a remote cable, and a speaker wire. The cables are made of copper and are of different gauges. The fuse holder is gold-plated and heat-resistant.

Key Features:

• This is a 4-channel amplifier that is rated at 1200 watts RMS. It comes with a complete 4 gauge amp kit.
• The Brutus 1200W RMS 4 Channel A/B Speaker Car Audio Amplifier is an amplifier that delivers 1200 watts of power to four speakers. It has a frequency response of 20 Hz to 20 kHz and a signal-to-noise ratio of 95 dB.
• This is a 4-channel amplifier that produces 150 watts per channel when used with 4-ohm speakers, 300 watts per channel when used with 2-ohm speakers, and 600 watts when used in bridged mode with 4-ohm speakers.
• This amplifier has a variable full/low-pass filter of 50-250 Hz and a variable full/hi-pass filter of 120-3000 Hz. It also has a variable bass boost of 0 to +10 dB.
• This is an amplifier with a frequency response of 10-45000 Hz and a THD of .05%. The signal-to-noise ratio is greater than 90 dB.