Best 4 Channel Amp For Mids And Highs 2023

This 4 channel amp is perfect for mids and highs, and comes with an amplifier, birth sheet with tested power, owner’s manual, mounting screws, and warranty.

The Rockville dB45 is a powerful and loud 4-channel amplifier that is perfect for powering mids and highs in a car stereo system. It is dyno-certified with 800 watts of RMS power, making it more than capable of providing plenty of volume and clarity.

This 4 channel amp for mids and highs is rated for 200 watts RMS power at 2 ohms, 135 watts RMS power at 4 ohms, and 400 watts RMS power at 4 ohms bridged. THD+N is less than 1%.

This is a 4 channel amplifier that is rated for 800 watts at 2 ohms, 540 watts at 4 ohms, and 1600 watts at 4 ohms when bridged. It has a high-speed MOSFET power supply and under voltage protection at 10V. It also has over voltage protection at 16V.

This 4 channel amp is ideal for mids and highs, allowing you to customize your sound with a fully adjustable 12dB / octave crossover and differential circuitry. With a low pass filter of 50Hz – 3KHz and a high pass filter of 15Hz – 1KHz, you can tailor the sound to your liking. The full IC-controlled protection circuitry ensures your system stays safe, while the 8 volt preamp circuitry provides the cleanest sound possible. The status mode LED indicator lets you know when the amp is working properly, and the minimum THD at rated power is < 0.05%. With a S / N ratio of >90dB and a frequency response of 10Hz – 50KHz, this amp is sure to

This is a 4 channel amplifier for mids and highs. It is brand new and has reliable quality.

This 4 channel amp is designed to provide mids and highs to four speakers. It features 6 phase high frequency regulation for improved sound quality.

This 4-channel amplifier is designed for mids and highs, and can push any size subwoofer within 160 watts of power. It features double low frequency output for added bass, and is ideal for any car audio system.

This 4 channel amp is equipped with a fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.

This amplifier is designed for mids and highs, and can be run in two channel or bridged mono mode. It is a Class A/B amplifier, which means it is efficient with big power and minimal distortion.

The Hifonics 4-Channel Amplifier is built for powerful sound with a PWM MOSFET power supply and an old-school Hifonics aluminum heat sink.

This 4 channel amp is designed to produce clear mids and highs, and is built to last with its low noise preamplifier and erosion resistant inputs.

This is a 4 channel amplifier that is used for mids and highs. It has RCA outputs and a daisy chain multiple amplifier build that eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.

This is a 4 channel amplifier for mids and highs. It has a classic Hifonics look and feel, with an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.

This 4 channel amp for mids and highs is a Class AB amp. Class AB amplifiers are typically more efficient than Class A amplifiers, and they are often used in car audio applications.

The 4 channel amp is for mids and highs and can operate in 2Ω stereo and 4Ω bridged full-range.

This 4 channel amp is designed for mids and highs, and features a military-grade PCB with PWM MOSFET power supply for reliable performance.

This 4 channel amp has protection against short circuits, overheating, and overloads.

This amp can take input from either high-level speaker-level sources or low-level RCA sources. It is intended for mids and highs, meaning that it will likely produce clear and detailed sounds from the midrange frequencies up to the high frequencies.

This 4 channel amp is for mids and highs. It is 400 watts max power at 2 ohms x 4 channels.

This 4 channel amp is for mids and highs and delivers 200 Watts of power at 4 Ohms. It is perfect for any car audio system.

This 4 channel amp is for mids and highs and it can output 800 watts of power when bridged at 4 ohms.

This 4 channel amp for mids and highs is full-range and has Class A / B topology. It uses a MOSFET power supply.

This 4 channel amp is perfect for mids and highs. It has low and high level inputs, allowing you to connect it to a variety of audio sources. The variable filter lets you adjust the sound to your liking, while the variable bass boost allows you to add some extra thump to your music.

This 4 channel amp has remote subwoofer control and blue backlit illumination. It is designed for mids and highs, and it will provide clear and powerful sound.

This is a 4 channel amp designed for mids and highs. It is 13.5″ deep, 10″ wide, and 2.4″ tall.

The 4 channel amp for mids and highs comes with a 6 year platinum online dealer warranty. This means that if you have any problems with the product, you can contact the online dealer for help.

This amp produces up to 450 watts per channel when driving two ohm speakers, 225 watts per channel when driving four ohm speakers, or 900 watts when bridged driving four ohm speakers.

This 4 channel amp is designed for mids and highs, and uses Class A/B topology. This means that there is a small amount of current flowing through the output transistors even when there is no audio signal, which results in better sound quality.

The 4 channel amp is a full range amplifier that can be used to run mids and highs speakers, as well as subwoofers. This amp is perfect for a shopper who wants to have the option to use it for a variety of purposes.

This 4 channel amp is designed for mids and highs, and uses a Mosfet power supply instead of a standard one. This means that it can control the output voltage and current more precisely, and doesn’t require feedback circuitry.

This 4 channel amp for mids and highs features a variable gain control, which allows you to adjust the amount of signal coming from your receiver and going to your amplifier. This can be useful for getting the perfect sound balance for your system.

This 4 channel amp has a variable bass boost, so you can control how much bass is output to your subwoofer.

This 4 channel amp is bridgeable, which means that you can increase the power output to your speakers and subwoofers by connecting two amplifier channels. This is great for people who want to get the most out of their sound system.

This is a 4 channel amp for mids and highs that is 13.5” x 10.31” x 2.25 and weighs 12 lbs.

The BOSS Audio Systems 4-channel amp is a powerful amplifier designed for mids and highs. It comes with a 6-year Platinum Online Dealer Warranty, making it a great choice for shoppers who want a long-lasting product.

This is a 4 channel amplifier that is rated at 1000 watts. It is a class AB amplifier, meaning that it is designed to produce moderate amounts of power with good efficiency. This amplifier is designed specifically for mids and highs, meaning that it will provide clear and powerful sound for these frequencies.

This low noise pre amplifier is ideal for mids and highs, providing four channels of amplification. It features a wide frequency response and low noise level, making it perfect for any audio application.

This 4 channel amp for mids and highs is ideal for a shopper who wants maximum low voltage signal from the source unit with minimal distortion.

The amp has four channels and is designed for mids and highs. It has low level RCA inputs and outputs.

This 4 channel amp is for mids and highs and is known for its high sound quality connection.

This is a 500-watt car amplifier that has four channels. It is class A/B, meaning that it is designed to provide high-quality audio reproduction. It has a MOSFET power supply, which is known for being efficient and providing good sound quality.

This 4 channel amp is powerful, delivering 125 watts of power to each of its 4 channels. It is designed specifically for mids and highs, making it a great choice for a shopper looking to improve their car’s sound system.

This 4 channel amp for mids and highs produces 75 watts of power per channel at 4 ohms impedance.

This amplifier has four channels and is adjustable to the user’s preference. It has a gain control, a low pass filter, a high pass filter, and a bass equalizer switch. This would be good for a shopper who is looking for an amp to improve the sound quality of their car stereo.

The 4 channel amp has 4 way protection circuitry and a frequency response of 20 Hz – 20,000 Hz.

This 4 channel amp has a signal to noise ratio of 105 dB, meaning that it will produce very little background noise when in use. This makes it ideal for use with mids and highs, as it will not interfere with their sound.

This 4 channel amplifier is a Class A/B power marine amplifier that is 1000 watts. It is a MOSFET amplifier, which means that it is designed to be more durable and have a higher power output than other amplifiers.

This amp is powerful enough to drive four 2-ohm speakers with 250 watts each. It can be used for mids and highs, and would be great for a shopper who wants a lot of power in a small package.

This 4 channel amp for mids and highs produces 150 watts of power at 4 ohms per channel.

This 4 channel amplifier is for mids and highs and is fully marinized with waterproof coating on the circuit board and rust proof painting on the mechanical case.

The 4 channel amp has user adjustable controls for gain, low pass filter, high pass filter, and a bass EQ switch. This amp is designed for mids and highs, and gives the user the ability to customize their sound.

This 4 channel amp features 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow, making it ideal for powering mids and highs. It also features a bass boost switch for added bass response.

The 4 channel amp has a signal to noise ratio of 105 dB and a frequency response of 20 Hz – 20, 000 Hz. It is designed for mids and highs.

This amplifier is designed to provide 1500 watts of maximum power to a full-range speaker system. It features four channels for connecting mids and highs, and is equipped with a variety of controls for adjusting the sound.

This amplifier is designed to provide a boost in power for mids and highs, up to 1500 watts. It is optimized for an RMS output of 150 watts, making it great for parties or other events.

The amplifier is a 4 channel amp for mids and highs. It is slim and fits perfectly into any trunk. It is easy to connect to your stereo system.