Best Enclosed Car Subwoofer 2024

This is an 8-inch car subwoofer that is loaded in a vented sub enclosure. It has a power output of 800 watts and features a Rockville K5 subwoofer.

The car subwoofer features a peak power handling of 800 watts, program power handling of 400 watts, and CEA rated RMS power handling of 200 watts. It has a final impedance of 4 ohm, and comes with an MDF enclosure. The enclosure is Bonded stapled and braced, and computer designed vents. The subwoofer is angled at 15% for perfect bass alignment, and is made with high quality aviation grade tweed carpet. The satin nickel speaker wire push terminals complete the look of the subwoofer, and the enclosure air space is 0.6 Cu Ft per sub. Vent dimensions (inches): 1.25″ x 4.75″ x 7″. Tuning frequency of enclosure:

This car subwoofer has 1.5″ 4-layer black aluminum voice coils wound with OFC (100% copper) wire. The wire is imported from Japan for better quality. The subwoofer also has a 30 oz. high quality magnet, a cast iron basket with black sanded finish, and a fiber reinforced ultra stiff black non-pressed paper cone. This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it.

The car subwoofer has a thick foam surround that provides incredible sound quality with minimal distortion. It also has blue stitching cone reinforcement that ensures long life. The polypropylene dust cap and gold-plated spring loaded push terminals are also great features. The mounting gasket with Rockville branding looks great and makes it easy to mount the subwoofer air-tight.

The subwoofer has a non-pressed paper body with a gap plate inside diameter of 60mm (2.36 inches). The gap plate outside diameter is 120mm (4.72 inches) and the gap plate thickness is 25mm (0.98 inches). The yoke outside diameter is 114mm (4.48 inches) and the yoke thickness is 5mm (0.20 inches). The yoke pole diameter is 38mm (1.5 inches).

This car subwoofer is an all-in-one, self-contained subwoofer that is ported and has a built-in amplifier.

This car subwoofer has a peak power of 600 watts and an RMS of 200 watts. It has a PWM MOSFET power supply and includes a recoil 8 gauge complete amplifier wiring kit.

This car subwoofer has a high-temperature aluminum voice coil, an ultra-stiff IMPP cone with Kevlar reinforcement, a 30 oz. magnet motor structure, and a high-density NBR rubber surround.

This is a subwoofer with a blue power/red protection LED indicator, a phase switch, a low pass filter, and a bass boost. The subwoofer level remote control is included.

This car subwoofer is compact and great for small spaces. The amplifier and subwoofer are all in one unit, making it ideal for cars with limited space.

This car subwoofer is fully functional and easy to debug, making it a great choice for shoppers who want a reliable and powerful subwoofer for their car. This subwoofer features a powerful bass response that will make your music sound great, and it is also easy to install and use.

This car subwoofer has a slim fuselage that is installed under the seat for better sound quality.

This car subwoofer is a 10 inch woofer speaker that is enclosed. It is great for adding bass to your car’s sound system.

This car subwoofer has a high temperature resistant coil design, making it a durable and long-lasting option for your car audio needs.

This is a stainless steel mesh car subwoofer that is black in color. It is resistant to rust and deformation.

The Pyle 8″ Amplified Low Profile Subwoofer System is an enclosed car subwoofer that offers a maximum power of 600 watts. It is designed to provide enhanced low frequency bass volume to improve the party atmosphere. It includes a wired remote control for easy volume adjustment and is easy to install.

This enclosed car subwoofer features a built-in amplifier with low pass crossovers and a control for adjusting input sensitivity from 0.12V to 3.5V. It also includes variable bass boost and a remote level control module for adjusting the subwoofer level.

This car subwoofer is a low profile model that is only 3 inches tall. It is 12.8 inches long and 9.5 inches wide. It comes with mounting hardware and is a great addition to your car stereo sound system.

This car subwoofer has high-level inputs, which means that you can use the speaker outputs from your head unit if it does not have RCA outputs. The subwoofer comes with a cable so that you can connect the outputs properly, as shown in the manual.

This car subwoofer has low level inputs, which are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source.

This is a 1200 watt, 12″ amplified car subwoofer enclosure with a 4 ohm impedance.

This is an enclosed car subwoofer that is 1200 watts peak power output and 300 watts RMS. It is a 12″ Super slim subwoofer.

The car subwoofer is made with a ultra stiff composite pulp cone that is reinforced with Kevlar. The 3D molded acrylic dust cap is designed to keep the subwoofer clean. The expanded & rolled steal basket is designed to give the subwoofer a deep bass sound.

This car subwoofer has a high density laminated foam surround, a high power strontium magnet, and an ultra saturated high BL motor structure.

This subwoofer has a vented core magnet motor structure for a more powerful bass and a 2″ high temperature aluminum voice coil for clearer sound. It also has 8mm washer & yoke plates and 13.6mm peak-to-peak x-max for a more durable design.

This is a car subwoofer with a magnet motor structure and a super slim sealed MDF enclosure design. It has aviation grade black tweet Carpet with embroidered logo.

This car subwoofer has a black synthetic leather front panel and an impedance of 4-ohms. It has a frequency response of 38hz-500hz and an spl @ 1W/1M of 96Db.

This subwoofer is 24″ long, 15″ high, 4.37″ deep at the top, and 6.65″ deep at the bottom. It has a built-in 300 watt RMS/ 1200 watt mono block amplifier.

This car subwoofer has a variable input level from 150mV to 5V, a low pass crossover frequency from 50Hz to 250Hz, and low level RCA inputs.

This car subwoofer has a high level speaker level input with auto start music sense. It also has an RJ11 jack for dash mounted bass remote.

This is a high-powered subwoofer that comes with a Plexiglass front window. It is a great choice for anyone looking to improve the sound quality of their car stereo system.

This is a car subwoofer with a blue polypropylene cone and a maximum power handling of 500 watts.

This is a subwoofer for a car that has a black rubber edge suspension and a frequency response of 30Hz-700kHz.

This car subwoofer has a 2” aluminum voice coil and dimensions of 12”H x 12”W x 17”D.

This car subwoofer is designed for extra deep bass, with a bandpass alignment for improved sound quality. It features a durable construction and a powerful amplifier for superior sound quality.

This car subwoofer is a 10-inch shallow subwoofer that is down-fire sealed in an enclosure. This subwoofer is designed to give you deep, rich bass without taking up a lot of space in your car.

The subwoofer is a 1200 watt, peak power output with 400 watts of RMS power. It is an enclosed car subwoofer that is designed to produce high-quality, low-frequency sound.

This car subwoofer has an impedance of 4 ohms, a frequency response of 30Hz – 500Hz, and a sensitivity of 95dB.

The subwoofer is made of spun aluminum, with a rubber EPDM surround and a copper-wound Kapton voice coil. It is mounted in an MDF enclosure.

This car subwoofer is 18.7″ wide, 6.1″ tall, and 12.2″ deep.

This car subwoofer is designed to be thin and fit at the bottom of a car seat, in order to provide a more enjoyable journey experience.

This car subwoofer has been designed to produce strong and elastic low frequencies, providing a powerful and immersive sound experience.

This car subwoofer is a two-in-one configuration of the power amplifier and the loudspeaker, making the installation in one step and saving the space inside the car. It has an ultra-thin thickness of 2.7 inches and can be installed under most car seats.

This car subwoofer has high-quality, super-long cables and control wires, so the shopper does not need to buy other accessories.

This car subwoofer is enclosed and has been tested for quality. It comes with a 12-month warranty.

The shopper is looking at an enclosed car subwoofer that includes a 10-inch sub model, along with the 8-inch. This means that the shopper can choose between the two different sizes of subwoofers, depending on their preference.

This car subwoofer is for a shopper who wants an amplified sound. The 180 watt amplifier drives the HS10 and the 150 watt amplifier drives the HS8. This subwoofer is enclosed so it will fit in most cars.

This car subwoofer is enclosed and ultra-compact, measuring just over 3″ high. It’s a great choice for shoppers who want a powerful subwoofer without taking up a lot of space.

The subwoofer has minimal parts and is easy to connect. It has a Molex plug and harness for quick and easy installation.

A car subwoofer with remote bass control included is a subwoofer that allows the user to control the amount of bass output from the unit. This can be done by adjusting the volume, changing the EQ settings, or by using the included remote control.

This car subwoofer has an aluminum frame, making it both durable and stylish. It’s also designed to give you the best possible sound quality, so you can enjoy your music to the fullest.

The 900 WATT POWER:10″ Amplified Low Profile Subwoofer System is an enclosed car subwoofer that offers a maximum power of 900 watts. It is designed to enhance the party vibe by providing great low frequency bass volume. It is a great addition to any car music audio system.

This subwoofer has an integrated amplifier with low pass crossovers and control for adjusting input sensitivity from 0.12V to 3.5V. It also includes variable bass boost and a remote level control module.

The subwoofer is enclosed and low profile, making it a good choice when space is limited. It is 14.2”x11.2”x3” in size and includes mounting hardware. This would be a great addition to a car stereo sound system.

This subwoofer has a high-level input, which means that you can use the speaker outputs from your head unit as the audio source. The subwoofer comes with a cable so that you can connect the outputs properly, as instructed in the manual.

This car subwoofer has low-level inputs, which are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal sources.