Best Active Subwoofer Car 2024

The Rockville RW10CA 800 Watt 10″ Slim Car Subwoofer is a powerful and compact subwoofer that can add a lot of low-end punch to your car audio system. It features a 10″ woofer in a slim enclosure, and it can handle up to 800 watts of power. It also has a built-in amplifier for easy installation, and it comes with all the necessary wiring and mounting hardware.

This is an active subwoofer car that has a peak power of 800 watts and an RMS of 200 watts. It has a PWM MOSFET power supply, which is a type of power supply that is more efficient than a standard power supply and can provide more power to the subwoofer.

This car subwoofer has both low-level RCA inputs and high-level inputs, meaning that it can be used with a variety of different audio systems. The high-level inputs have “auto turn-on” technology, meaning that they will automatically turn on when they detect an audio signal.

This subwoofer car has an adjustable input sensitivity, meaning that you can control how much power is going to the subwoofer. It also has a soft delayed remote turn-on, meaning that the subwoofer will slowly turn on when you turn on the car’s stereo system. This is to prevent the subwoofer from being overworked when it first turns on.

This active subwoofer car has a thermal protection circuit and a short protection circuit to help keep it safe from damage.

This active subwoofer car has an overload protection circuit and a phase switch that can be set to 0° or 180°.

This subwoofer car has a low pass filter of 50Hz to 150Hz and a bass boost of 0 to 18dB at 45Hz.

The car subwoofer has a remote control for the subwoofer level, a built-in subsonic filter, and a frequency response of 20Hz – 150Hz. The sensitivity is 90dB @ 1w / 1m.

This active subwoofer car has a maximum power of 200 watts and an impedance of 2 ohms. Its dimensions are 12.4 x 13.4 x 2.7 inches.

This active subwoofer car is a powerful and versatile addition to any car stereo system. It features a built-in amplifier and 10″ subwoofer for deep, rich bass. The unit also includes a remote control for easy operation.

The Rockville USS8 is an active subwoofer car that is designed to be mounted under a seat. It is powered by a 600 watt peak / 150 watt RMS amplifier and features heavy duty mounting feet and a PWM MOSFET power supply. The subwoofer has a low level RCA input and an impedance of 3 ohms. The speaker size is 8 inches.

This subwoofer is designed to provide high-quality sound with minimal distortion. It features high-level inputs with auto turn-on technology, adjustable input sensitivity, and soft delayed remote turn-on. Additionally, it has thermal protection and short protection circuits to prevent damage to the unit. The subwoofer has a green power/red protect LED to indicate when it is in use.

This is an active subwoofer car with a phase switch of 0 degree or 180 degree, a low pass filter of 50hz – 150hz, a bass boost of 0 – 12db at 45hz, and a subsonic filter of 20hz – 50hz. The THD is less than 0.15% and the subwoofer level can be controlled remotely. The fuse rating is single 20A.

This car subwoofer has a maximum power of 150 watts and an impedance of 3 ohms. It is 13.6 inches long, 9.9 inches wide, and 2.9 inches tall. Its frequency response is 15Hz – 125Hz.

This car subwoofer has a Signal to Noise Ratio of 82dB and a Sensitivity of 90dB at 1w/1m. The input sensitivity for RCA level is 195mV and the input sensitivity for HIGH level is 5.6V.

This subwoofer is designed to fit under a car or truck seat and is slim in design. It is active, meaning that it has a built-in amplifier, and it is powered, meaning that it plugs into a power outlet. It is rated at 400 watts and has a frequency response of 20-150 Hz.

This subwoofer car has a cast aluminum enclosure that stays cool at all times. It has a peak power handling of 400 watts.

The subwoofer is designed to handle 100 watts of power, has built-in feet for stability, and a power supply that helps regulate power. It also has low-level RCA inputs, high-level inputs, and an adjustable input sensitivity. The subwoofer also has a delayed remote turn-on, thermal protection, short protection, and overload protection. The subwoofer also has a green power/red protect LED and a phase switch.

This is an active subwoofer car that has a low pass filter of 50Hz to 150Hz, a bass boost of 0 to 12dB at 45Hz, and a built in subsonic filter at 20Hz. It also has a THD of <0.4% and a subwoofer level remote control. The fuse rating for this subwoofer is 15A.

The subwoofer is 11.4″ x 8.3″ x 2.8″, has a peak power of 400 watts and an RMS of 100 watts. The impedance is 4 ohms and the frequency response is 20Hz-150Hz. The subwoofer has a signal to noise ratio of >90dB and a sensitivity of 90dB @ 1w/1m. The input sensitivity for low level is 300mV and for high level is 1.0V.

The shopper is looking at an active subwoofer car that is 1300 watts max power and 350 watts nominal. It is made with pre-loaded 12″ injection molded polypropylene composite cone construction and has a corded electric power source. The speaker size is 12 inches.

This active subwoofer car has a built-in 300 W Max (150 W RMS) Class D amplifier, which makes it great for playing music loudly and clearly.

This car subwoofer has a ported enclosure design that allows for deep and accurate bass response.

This subwoofer car has a variable bass boost feature that allows you to increase the bass level by up to 12 dB. The bass boost is adjustable from 20 Hz to 130 Hz, so you can customize the sound to your liking.

The Rockville RBV10.1A is a single 10” 500 watt active subwoofer enclosure. It is made of Kevlar reinforced pulp cone and has an inverted carbon graphite molded dust cap. It is single 4-ohm and has a 1.5” voice coil.

The subwoofer has a frequency response of 35Hz to 200Hz and a sensitivity of 88dB. It has an anti-vibration braced MDF cabinet and an angled back that fits perfectly against rear seats. The computer-tuned bass reflex port and blue/black aviation grade tweed carpet with embroidered Rockville logo make it a perfect choice for a shopper.

This is an active subwoofer car amplifier with high-speed MOSFET power supply, high-level speaker inputs, low-level RCA inputs, and built-in low pass crossover (30Hz – 160Hz). It is Class AB amplifier.

This car subwoofer is able to handle up to 8 gauge wire, has an input voltage of 100mV to 5V, and is 15.75″ long, 12.99″ tall, and has a width of 10.63″ at the top and 14.17″ at the bottom. It also has Power (blue) and Diagnostic (red) LED indicators, a 20A fuse, and weighs 22.59 lbs.

This is a subwoofer car that has a maximum power of 1300 watts and a single 12″ subwoofer. It has a built-in amplifier and is sealed for extra bass.

This car subwoofer has a cellulose fiber cone and urethane surround. It has a frequency response of 20 – 125 and a sensitivity of 114dB.

This is an active subwoofer car amplifier with a Class D amplifier. It has a 0-12dB bass boost and a remote knob is included.

This is an active subwoofer car that has a carpet finish. This means that it is designed to be placed on the floor of your car, and that it has a carpeted exterior. This gives it a more finished look and helps to protect it from scratches and other damage.

This is an active subwoofer car that comes with an MP3 input. It is a 6.5” 300W subwoofer that is powerful and can handle a lot of bass.

This is an active subwoofer car that has a peak power of 300 watts and an RMS of 150 watts. This means that the subwoofer can handle up to 300 watts of power at its peak, and 150 watts of power on a regular basis. This is a great car subwoofer for anyone who wants powerful bass without breaking the bank.

The subwoofer is a 6.5“ high power woofer in a vented tubular enclosure. This allows for deep, rich bass that is perfect for any music lover.

This car subwoofer has an integrated amplifier that is rated for 150 watts RMS. This means that it can produce up to 150 watts of power, making it great for adding some extra bass to your music.

This subwoofer car has a rear aero vent bass system that provides great sound quality. It also has a sleek design that will look great in your car.

This is an active subwoofer car that Pioneer TS-WX130DA Compact 8″ x 5. 25″ 160-Watt Active Subwoofer with Built-in Amp 8″ x 5. 25″ woofer ; 160W max. This subwoofer car has a built-in amplifier and a 8″ x 5. 25″ woofer. It is capable of producing 160 watts of power.

This subwoofer is 50 watts and has an aluminum cone. The urethane surround will allow for a better sound quality. The built-in class D amp will help to increase the performance with the deep or dynamic listening modes. The gain will also help to increase the performance of the subwoofer.

This subwoofer car has a low-pass filter that allows for a deep, rich bass sound. It also has a built-in amplifier for added power and volume.

This subwoofer car has phase and bass modes that can be controlled at the remote. The frequency response is also given.

This car subwoofer is designed to produce deep, powerful bass tones. It has a frequency response of 20Hz-200Hz, meaning it can reproduce low frequencies very accurately.

If you’re looking for a powerful subwoofer to add to your car’s audio system, this 8-inch low profile model might be a good option. It’s a preloaded active subwoofer system, meaning that it comes with its own amplifier, making it easy to install. Plus, its low profile design means it won’t take up a lot of space in your car.

This active subwoofer car has 300 watts of peak power and 150 watts of rated power. It is designed to provide powerful and accurate bass reproduction.

The Spun Paper Cone is an active subwoofer car that delivers deep, rich bass. This subwoofer car has a 10″ cone that is made of sturdy paper and is powered by an amplifier. The Spun Paper Cone is a great choice for anyone who wants to add some extra bass to their car audio system.

The amplifier in this subwoofer is Class D, meaning it’s a high quality amplifier. The variable low pass filter means that you can adjust the cutoff frequency of the subwoofer, allowing you to customize the sound to your liking. The RCA and high level inputs allow you to connect the subwoofer to a variety of different audio sources.

This car subwoofer is very sensitive, meaning that it will pick up a lot of sound from your car stereo. It will produce a deep, rich sound that will improve your car audio experience.

This car subwoofer is easy to use and easy to debug if there are any problems. It is fully functional and can provide great sound quality for your car.

This car subwoofer is 68 mm slim and can be installed under the seat for better sound quality.

This is a 10 inch woofer speaker that is great for a car. It is active, so it will need an amplifier, and it is a subwoofer, so it will reproduce low frequencies well.

This car subwoofer has a high temperature resistant coil, meaning that it can withstand high temperatures without being damaged. This makes it ideal for use in a car, where the temperatures can get very high.

This car subwoofer is made of black painted stainless steel mesh, so it is resistant to rust and deformation. It is also powerful, making it ideal for playing music in your car.